Galvanized Steel Wire, Galvanized Iron Wire, Galvanized Iron Wire
50X50mm,40X70mm,or as your request
Hot Dipped Galvanized after Weld
In bundles or pallet
Silver,or pvc coated any kinds of color
Packaging & Delivery
welded gabion packed in wooden box or pallet
Gabion wire mesh features:Anti-rust,uniform opening, FIRM strong and beautiful features Tensile strength:38kg/m2">>38kg/m2 gabion size:111,10.51, 11.51,etc.
Welded gabion bo is widely used in retaining wall structures, rockfall and soil protection and so on. Welded gabions are filled on site with hard and durable stone to form mass gravity structures. And welded gabions are quicker and simpler to install than woven mesh gabions.
Welded gabion bo is manufactured from cold steel wire for tensile strength. It is electrically welded together then hot dipped galvanized or PVC coated, ensuring a longer life. There are galvanized welded gabion and welded PVC gabions. Gabion boes are designed on the principle of mass earth retaining wall. The strength of the wire mesh helps to with- stand the forces generated by the retained soil.
Specifications of welded gabion bo:
Nominal Bo sizes m)
No. of diaphragms (no.)
Capacity per bo(m3)
Standard wire diameter (mm) Heavily Galvanised or zinc coated wire 2.20, 2.50, 2.70, 3.00, 4.00, 5.00.
Polymer coated on Heavily Galvanised or zinc coated wire 2.5/2.8, 2.7/3.0, 3.0/3.3, 4.0/4.3, 5.0/5.3.
Welded gabion bo advantages:
Blends easily and harmoniously with the natural surroundings.
Low cost alternative to concrete or masonry structures.
Very high resistance to natural forces due to better tensile strength.
Can withstand any unpredictable movement or settlement without loss of stability.
Simple and speedy installation, making it cost effective.
Quality finish and appearance is more aesthetically pleasing.
More rigid than woven mesh resulting in a more uniform finish when built.
Quicker and cheaper to install than Woven Mesh gabions because no pre-stretching required.
Special gabions sizes and mesh such as gabions with 4mm front mesh and 3mm mesh else can be available.
1. Control and guide of water or flood
2. Preventing of rock breaking
3. Rock fall protection
4. Water and soil protection
5. Bridge protection
6. Strengthening structure of soil
7. Protection engineering of seaside area.
8. Port project
9. Keep off dust wall
How to install welded gabion bo?
Step 1. Ends, diaphragms, front and back panels are placed upright on the bottom section of wire mesh.
Step 2. Secure panels by screwing spiral binders through the mesh openings in adjacent panels.
Step 3. Stiffeners shall be placed across the corners, at 300mm from the corner. Providing a diagonal bracing, and crimped over the line and cross wires on the front and side faces. None are needed in interior cells.
Step 4. Gabion bo filled with graded stone by hand or with a shovel.
Step 5. After filling, close the lid and secure with spiral binders at the diaphragms, ends, front and back.
Step 6. When stacking tiers of the welded gabion bo, the lid of the lower tier may serve as the base of the upper tier. Secure with spiral binders and add pre-formed stiffeners to eterior cells before filling with graded stones.
Packaging & Shipping
Packaging Detail: Pallet, in bundle, or as required.